Disassembly Huawei Honor 8

Honor 8 Features

 

  • Body materials: metal, glass
  • Operating system: Android 6.0, EMUI 4.1
  • Networks: GSM / EDGE, UMTS / HSDPA, LTE (nanoSIM)
  • Screen: IPS LCD, diagonal 5.2 ", resolution 1920x1080 pixels (FullHD), ppi 423, glass Gorilla Glass 3
  • Platform: HiSilicon Kirin 950
  • The processor: eight-core, 64-bit, 4 cores 2.3 GHz (Cortex-A72) and 4 cores 1.8 GHz (Cortex-A53)
  • Graphics: Mali T880 MP4
  • Memory: 4 GB
  • Storage for data storage: 32/64 GB
  • Memory card slot: yes, microSD (instead of the second SIM card)

 

 

  • The main camera: two modules of 12 megapixels, f / 2.2, laser autofocus, dual LED flash
  • Front camera: 8 Mp, f / 2.4
  • Interfaces: Wi-Fi Dual-Band, Bluetooth 4.2 (A2DP, LE), NFC, infrared, USB Type-C connector (USB-Host) for charging / synchronization, 3.5 mm headset / headphone jack
  • Navigation: GPS (support A-GPS), Glonass
  • Optional: fingerprint scanner, accelerometer, light sensor, proximity sensor
  • Battery: 3000 mAh, fast charging
  • Dimensions: 145.5 x 71 x 7.5 mm
  • Weight: 153 grams

 


The process began with the dismantling of the rear glass panel. The glass is fixed to the metal frame with glue, but there were no special difficulties when removing it. Particular attention during disassembly should be given to the ribbon cable, which connects the motherboard and other elements. By negligence it can be damaged. Inside Honor 8, many thermo-stickers were found to dissipate the heat emitted by the processor. Specialists from IT168 note that the case of glass, although it looks pretty beautiful, but is a fairly fragile material.

The complete disassembly of Honor 8 is shown in the photo below.

Comments: 0